15T integrated hydraulic puller, capable of switching between two-jaw and three-jaw configurations. It has a 15-ton hydraulic output power, facilitating the disassembly of bearing, gear and pulley. The thickened alloy steel jaws are less prone to deformation. A spare sealing ring is provided to prevent oil leakage. The complete set comes with a portable toolbox, suitable for automotive repair, machine tool repair and agricultural machinery repair.

The built-in integrated hydraulic cylinder can output a 15-ton thrust force by manually pressing the lever. All the problems of traditional manual threaded pullers, such as strenuous operation and sluggishness, have been completely solved. Rusty and jammed bearings and gears can also be smoothly pulled out. The axial travel can reach 50mm, the vertical pulling distance is 180mm, and the maximum lateral spacing is 300mm. It is suitable for different diameter wheels, bearings and other accessories. Slow and uniform pulling out is achieved, avoiding deformation and damage to the shaft and gears caused by violent knocking. The disassembly of precision components is safer.This all-in-one hydraulic ram has a rated pulling force of 15 tons and supports flexible switching between two claws and three claws. It is specially designed for the disassembly of bearings, gears, pulley wheels, and flanges. With a hydraulic integrated structure, it does not require an additional oil pump. It is efficient and labor-saving for auto repair and mechanical maintenance, and comes with a portable toolbox and spare sealing rings. It is stable and durable for long-term and high-intensity operations.
Two claws and three claws can be freely switched, suitable for various specifications of components
It comes with detachable and extendable pull claws, supporting two-claw and three-claw usage modes: the three-claw design distributes the force evenly, suitable for circular symmetrical bearings and pulley wheels; the two-claw is suitable for single-sided clamping and disassembly in narrow spaces. The total length of a single claw is 330mm. Even large-sized workpieces can be firmly gripped without slipping. The 60mm thick top screw thread has sufficient strength and is stable and not prone to bending. It can be adapted for automotive hub bearings, motor gears, and machine tool pulley wheels. The entire machine weighs 11kg and can be easily moved and operated by one person. The total length of the machine is 395mm, and it does not occupy space when placed in a workshop or auto repair station.
Thickened quenched steel, durable sealing, and less oil leakage
The pull claws and push rods are made of thickened alloy steel that is quenched and forged, with high hardness and resistance to stretching. They are not prone to deformation or fracture during long-term and high-frequency disassembly. The hydraulic cylinder is equipped with multiple layers of sealing components, and a spare sealing ring is included in the kit. The aging sealing ring can be replaced by oneself to effectively prevent oil leakage and pressure loss. The extended anti-slip manual lever is easy to apply pressure and hold, and the pressure lever can be rotated to adjust the angle. It can also be operated normally in narrow equipment gaps.
A complete tool storage box, suitable for multiple scenarios in auto repair machinery
The entire set of tools is stored in a hard engineering plastic tool box, with separate compartments for storing the oil cylinder, pull claws, and sealing accessories. It is neat and tidy when carried for door-to-door auto repair, and the parts are less likely to be lost. It is widely applicable in auto repair, motor maintenance, agricultural machinery maintenance, and machine tool equipment maintenance. It can disassemble bearings, gears, pulley wheels, crankshaft flanges, and impellers, replacing traditional violent knocking tools, significantly improving maintenance efficiency, and is a must-have professional disassembly tool for mechanics and auto mechanics.